Testing Done Without Retries

Radio range test results, how to maximize radio range, questions, problems

Testing Done Without Retries

Postby jeremy » Wed May 01, 2013 3:49 am

In addition to the testing we posted in the video on our Kickstarterproject page, we also did some longer range unobstructed range tests.

1.0 Miles - 70% Loopback - No Retries
6 ft elevation on both ends along the level street called Fort Street (900 E.); 70% loopback. Cars traveling on the road seem to affect the results, as the results in any one location would vary, depending on whether another car was in between TX and RX.
Image

2.0 Miles - 85% Loopback - No Retries
2.0 mile test: one end is about 1/3 the way up the hill on S. Mtn and has a great view of the Draper Valley, the other end is my car with module about 6' off the ground.@ 2.0 miles out, 85% loopback. trees and other foliage totally blocks the signal. LOS is required for any substantial throughput.
Image

2.7 Miles - 60% Loopback - No Retries
2.8 mile test: one end is about 1/3 the way up the hill on S. Mtn and has a great view of the Draper Valley, the other end is my car with module about 6' off the ground. @ 2.8 miles out, 60% loopback. trees and other foliage totally blocks the signal. LOS is required for any substantial throughput.
Image
jeremy
 
Posts: 8
Joined: Thu Nov 15, 2012 5:44 am

Return to Wireless Radio Range

Who is online

Users browsing this forum: No registered users and 1 guest

cron